All-Test Pro 5 Motor Tester for all types of Industrial Motors

Demonstrations available!

Download Product Literature

The ALL-TEST Pro 5 is a motor circuit analyzer and data collector, and the most powerful off-line motor diagnostic tool available today. It can be used to evaluate motors of any type, size, or voltage – AC, DC, synchronous, wound rotor, and servo motors, as well as transformers and other coil-based devices.

Description

The ALL-TEST Pro 5 is a motor circuit analyzer and data collector, and the most powerful off-line motor diagnostic tool available today. It can be used to evaluate motors of any type, size, or voltage – AC, DC, synchronous, wound rotor, and servo motors, as well as transformers and other coil-based devices.

The All Test 5 utilizes a series of both standard and proprietary tests to diagnose motor issues including: insulation issues, contamination, winding faults, turn faults, ground faults and more.

When compared to the competition, the All Test 5 is more portable, far less expensive and able to provide full results on a motor in just a few minutes.

Get a more accurate picture of the health of your motors with the All Test Pro 5!

Features of the All Test 5 Motor Tester

Reference Test (TVS™)
An initial baseline test is performed using the Test Value Static (TVS™). Results are stored in the ALL-TEST PRO® 5 and subsequent test results can be immediately recalled on the instrument to instantly show you any developing problems or changes with the rotor and stator. Access to the software is not required.

Automatic Test Mode
An automatic test mode is used for most tests. On screen prompts walk you through the test – no user manual needed. In just a few minutes, anyone can learn to use it!

On The Spot Diagnosis For Troubleshooting
ALL-TEST PRO® 5 results are immediately displayed for field evaluation.  Our quick reference guide helps you make the call on the spot. Answer the mechanical / electrical question immediately and rule the motor “in” or “out”.

Rapid Evaluation of the Entire Motor Circuit
Immediate and complete information on Status of Stator, Rotor, Connections, Contamination and Ground Faults A single, 2-minute test evaluates the windings, cabling, and connections.  Additional tests let you evaluate the rotor and cabling to pinpoint the fault.

Testing of AC and DC Motors, Transformers & Generators
The ALL-TEST PRO® 5 tests all types of motors, including induction, synchronous, AC, DC, brushless DC, servo and wound rotors, as well as single phase motors. The health of all motor components is evaluated, including, but not limited to: induction windings and rotors; DC field windings and armatures; and field and rotor coils in synchronous motors. Single and 3-phase transformers, pole and pad mounted, are also ideal candidates for motor evaluation with the portable, lightweight AT5.

Data Collection With Companion Software For PdM
With a memory storage capacity for more than 650 tests, the ALL-TEST PRO® 5 has specific motor trending data accessible at the touch of a button.  Test results are easily uploaded to your computer and our MCA Basic™ software provides expert diagnosis, trending, and a wide variety of printed or on screen reports. Software is available for individual or group users.

Testing From The Motor Control Center
Most tests on installed motors are done from the MCC. Tests can be made through 1000+ feet, depending on cable. Even hard to reach motors (overhead cranes, submersible pumps, etc.) can be tested quickly and easily. No need to test at the motor terminals unless a fault is indicated.

Download Product Literature